What is Cisco 200-355 dumps?”Implementing Cisco Wireless Network Fundamentals” also known as 200-355 exam, is a Cisco certification which covers all the knowledge points of the real Cisco exam. Share free the most recommended Cisco CCNA Wireless 200-355 dumps exam video resources covers all key points for easier pass. Pass4itsure Cisco 200-355 dumps exam questions answers are updated (421 Q&As) are verified by experts. The associated certifications of 200-355 dumps is CCNA Wireless.

Exam Code: 200-355
Exam Name: Implementing Cisco Wireless Network Fundamentals
Q&As: 421

[100% Vaild Cisco 200-355 Dumps From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWUkUwT0lYclNxbFU

[100% Vaild Cisco 400-101 Dumps From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWczJDVzl1SUJLWms

Implementing Cisco Wireless Network Fundamentals  Pass4itsure 200-355 dumps exam features:

  • Detailed questions and answers for 200-355 exam.
  • Try a demo before buying any Cisco exam.
  • 200-355 questions and answers, updated regularly.
  • Verified 200-355 answers by Experts and bear almost 100% accuracy.
  • 200-355 tested and verified before publishing.
  • 200-355 exam questions with exhibits.
  • 200-355 same questions as real exam with multiple choice options.

200-355 dumps

Pass4itsure Latest and Most Accurate Cisco 200-355 Dumps Exam Q&As:

QUESTION 118
A customer wants to deploy Cisco Cloud Wireless architecture with 802.11ac capabilities.
Which access points would meet the customers’ requirements? (Choose two.)
A. Cisco 3700 Access Points
B. Cisco MR34 Access Points
C. Cisco MR18 Access Points
D. Cisco 3600 Access Points
E. Cisco MR72 Access Points
F. Cisco 1570 Access Points
G. Cisco MR26 Access Points
200-355 exam 
Correct Answer: BE
QUESTION 119
The administrator needs to create a report that shows all controllers, APs, and Cisco 3300 Series MSEs in
the WLAN, including hardware and software information. Which report includes this information?
A. Device > Inventory
B. Mesh > Nodes
C. Network Summary > Executive Summary
D. Network Summary > 802.11 Summary
Correct Answer: A
QUESTION 120
An access point is currently transmitting at 4 mW. The customer needs to increase its signal strength by 6
dB to create a larger wireless cell. What should the new transmit power be?
A. 8 mW
B. 10 mW
C. 12 mW
D. 16 mW
E. 24 mW
200-355 dumps 
Correct Answer: D
QUESTION 121
A user is unable to access a lobby administration web page when using a wireless laptop; however, the
user can access the page with a wired desktop computer. Which management feature needs to be
enabled on the WLC to allow laptop access?
A. management via wireless
B. dynamic interface management
C. HTTP
D. HTTPS
E. TACACS
F. SSH
Correct Answer: A
QUESTION 122
200-355 dumps

Select and Place:
200-355 dumps

Correct Answer:

200-355 dumps

QUESTION 123
200-355 dumps

200-355 dumps

Correct Answer:
200-355 dumps

QUESTION 124
Regarding the registering of Steelhead appliances,
A. Local appliances (on the same IP subnet) are automatically registered every time because their 10- byte probe is intercepted by the CMC appliance
B. Remote appliances are registered when a fixed-target rule is applied to the appliance directing it to the CMC appliance
C. Remote appliances are registered by proxy via the server-side Steelhead appliance
D. Remote appliances are registered manually when they have not auto-registered with the CMC appliance
E. Local appliances can only be registered manually, since fixed-target rules may only be applied to remote Steelhead appliances
200-355 pdf 
Correct Answer: D
QUESTION 125
When manually registering a Steelhead appliance on the Central Management Console (CMC) appliance:
A. The serial number and IP address must match what is on the Steelhead appliance
B. The MAC address and IP address must match what is on the Steelhead appliance
C. The serial number and hostname must match what is on the Steelhead appliance
D. The serial number is independent of the hostname, as the hostname of the Steelhead appliance on the
CMC appliance will get overwritten if there is a different hostname on the Steelhead appliance
E. Both A and D
Correct Answer: E
QUESTION 126
The secure vault on the CMC appliance: (Select 3)
A. Is always enabled and uses AES 256-bit encryption
B. Can be enabled and supports 128, 192 and 256-bit AES encryption
C. Is always enabled and opens by default at startup if the secure vault password has not been changed
D. Has a default password which, if changed, means that it will need to be opened manually after each startup
E. Contains all configuration and SSL information
200-355 vce 
Correct Answer: ACD
QUESTION 127
Which two of the following attributes are required to be added to a TACACS+ server to enable monitor and
admin logon access to the CMC appliance via TACACS: (Select 2)
A. service = rbt-exec {local-user-name = “monitor”}
B. service = wan-accel {local-user-name = “monitor”}

C. service = rbt-exec {local-user-name = “admin”}
D. service = wan-accel {local-user-name = “admin”}
E. service = rbt-exec {local-user-name = “su”}
Correct Answer: AC
QUESTION 128
What types of operations can be observed under the Manage > Operation History page in the CMC
Management Console? (Select 2)
A. push
B. link
C. abort
D. fetch
200-355 exam 
Correct Answer: AD
QUESTION 129
What are the four types of policies on a CMC appliance?
A. Networking, Optimization, Software, System
B. Networking, Optimization, Rules, System
C. Networking, Optimization, Security, System
D. Networking, Acceleration, Security, System
Correct Answer: C
QUESTION 130
Which of the following best describes the way a CMC appliance policy can be created?
A. By creating new policies through the CLI
B. Policies can be created either manually, via a configuration fetch from a Steelhead appliance, or by copying another policy
C. By copying from a text file
D. Policies can only be created manually
200-355 dumps 
Correct Answer: B
QUESTION 131
Which of the following are examples of Networking policies on the CMC appliance? (Select 3)
A. WCCP
B. HighSpeed TCP
C. Routing
D. Port Labels
E. HTTP Protocol
Correct Answer: ACD
QUESTION 132
Which of the following are examples of Security policies on the CMC appliance? (Select 3)
A. SSL Peering
B. SSL Ciphers
C. User Permissions
D. Web Settings
E. RADIUS

200-355 pdf Correct Answer: CDE
QUESTION 133
Which of the following is true about fetching Steelhead appliance’s configurations from a CMC appliance?
A. Fetched configurations are automatically saved as groups, which can be managed and applied to appliances and appliance policies
B. Configurations cannot be fetched from the CMC appliance, they must be pushed
C. Fetched configurations are automatically saved as policies, which can be managed and applied to appliances and appliance groups
D. Fetched configurations are saved as system settings, which can be managed and applied to appliances and appliance groups
Correct Answer: C
QUESTION 134
What methods can the CMC appliance use to provide notification of CMC system events? (Select 3)
A. Email
B. RADIUS
C. SNMP traps
D. Syslog
200-355 vce 
Correct Answer: ACD
QUESTION 135
The CMC appliance version 6.1 supports which SNMP versions? (Select 3)
A. Version 1
B. Version 2
C. Version 2c
D. Version 3
Correct Answer: ACD

Passing the Cisco 200-355 dumps has never been faster, cheaper and easier, now with real exam questions and answers, without the doubty https://www.pass4itsure.com/200-355.html dumps that are frequently incorrect. Pass4itsure provides cheapest way to pass without 200-355 dumps.